⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Photocopiers

Brother DCP8155 impossible to print EC

Rodríguez Andrés Gabriel

hace 5 años

Hello, I read in a query of another model, which could be the fan or some connectors, if someone has the solution for this problem and diagram to locate the components, since I will thank you, the fan works. Thank you

Comentar

deadhorse38

2.398

hace 5 años

That I missed what is your problem? Or rather I did not understand your question !!!



Responder

Rodríguez Andrés Gabriel

hace 5 años

if you look at the title it says the problem



Responder

deadhorse38

2.398

hace 5 años

If you excuse the detail is that it is not so well specified, I do not know if the error is impossible to print or ec ?? Or if that comes out on the display or what?



Responder

Rodríguez Andrés Gabriel

hace 5 años

"Impossible to print EC" is what appears on the display



Responder

SIRZECHS

214

hace 5 años

Good morning, I can't support you with the diagram. but I hope to bring you something. Did I give you any details before marking that code? clogging, no leaf climbing, stains? any other reference would help a lot. What if I think it is a problem with the paper lifting jacket, I commented that I had that code and replace that part was the solution. The other thing is that you have breakdowns in the wiring since in those teams it is very common that enter mice and others and have damaged something internal. I advise you to uncover the equipment to observe anomalies. regards

Comentar

Rodríguez Andrés Gabriel

hace 5 años

Thank you for your input, the wiring is fine, I do not see anything defective, the equipment starts well and after 5 or 10 minutes the code appears, out of nowhere, while waiting, you turn it off and on and it is deleted you make normal copies and then after a while the code appears



Responder



gugusa

hace 5 años



hace 5 años

hello look I once had a similar problem and it turned out to be one of the fuser thermistors although this model also usually desolders the connectors that are in the machine where the fuser thermistors are connected, and for what you said they could become Some thermistor because you say that you turn it off let it cool and restart. Remember to rate the answer if it was the solution.

Comentar

Rodríguez Andrés Gabriel

hace 5 años

Hello, check the fuser and toner led connectors, I changed the fuser unit and it remains the same, the truth is that I do not know what else to do, the manual does not contain anything about this error.



Responder

Rodríguez Andrés Gabriel

hace 5 años

Hello people, well after a while where I stopped taking care of this equipment, I reassembled it, in the assembly I noticed that the plate where the fuser thermistor is connected, the connector tracks were cut, so I scraped the coating and returned to soldering said connector, after several days of use has not remarked the error, so I deduce that this was the problem, gugusa the solution is indicated in your coentary, thanks.



Responder