⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Photocopiers

Sharp AL-2040CS Continuous stripe failure on one side of the blade

enriquexxx
hace 6 años
hace 6 años
Sharp AL-2040CS leaves a continuous line in the copy about 2 centimeters looking at the copy of the left-sided front, sometimes oddity does not come out, change the cylinder and clean the mall and one that looks like worm and remains the same Thank you if can you guide me
tecnicocopiadoras123
hace 6 años

Hi white or black stripe

Responder
rubcanli
rubcanli
201
hace 6 años

`` Cut into the loading crown, clean the crown with a brush and then with transparent nail polish you paint the paste base where the screws on the inside side go, taking care not to dirty the saw. Dry the enamel well and test .

Responder
enriquexxx
hace 6 años

Black stripe continues on almost the entire sheet of about 2 or 3 millimeters thanks for your comments the loading crown is where is the mall?

Responder
Uno mas que trabaja
hace 6 años

yes sir that is the crown of charge, it is best to change it

Responder
Uno mas que trabaja
hace 6 años
hace 6 años
good afternoon friend, the best solution is to change the primary charge crown, which is where the little mall goes
sebastian arzate gonzalez
hace 6 años

HELLO, YOU CAN ALSO DISASSEMBLE THE LOAD CROWN ASSEMBLY AND THEN WITH A SEMI-DIRECTED BRUSH (FOR EXAMPLE WITH A TOOTH BRUSH USED BUT CLEAN) WASH THE COMPONENTS WITH CLEAN WATER, LET THE DRYING AND WEAPONS ASSEMBLE THE ASSEMBLY;
IN THE SIERRA POINTS SMALL DEPOSITS ARE FORMED AND THEREFORE THE SHORT THAT IS OBSERVED AS A BLACK LINE

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis