⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Photocopiers

Kyocera m2135dn Error C6000

Ofiprinting

161

hace 6 años

Good morning, a customer has one of these machines, it is a new model, and the error C6000 came out, which is a fault in the fuser, the machine is really new, I checked the thermistors and everything is going well, I connected it and it worked well two days, on the second day this error came out again, I do not know how to reset it in this machine or if it really is a failure in the fuser unit, because in the service menu of this machine does not appear the mode u163 that is to reset this error . I look forward to any help ...

Comentar



Richardtextex-13

980

hace 6 años



hace 6 años

Check with this to see if it helps you. and comment on how you are doing ... To reset this code we must do the following: We turn on our machine with an open door no matter what, we do this to prevent us from entering the code and locking. Obviously the machine will indicate on the display that we have the door open, we press on the numeric keypad 1087 1087 U000 will appear on the screen. Note: if you don't get U000: on some models it may be necessary to press the STATUS / JOB CANCEL key before dialing 1087 1087, Press on the numeric keypad 163 and press the green key (start), now it should appear on our screen U163. Press EXECUTE and then press the green key or the OK key (it may vary depending on the model) we wait for 15 or 20 seconds and turn off and on the main switch machine.

Comentar