Hello, I would like to ask you, I have the zte kiss 2 max and when I turn it on, the screen stays blank looking for information I found that the most likely is the flex however I noticed that it was overheating at the bottom of the screen (where is the buttons home, etc) and when I disassembled it, I saw that on the flex tape that is attached to the screen the teeth on one side were damaged as well as a battery when vomiting, to which I would like to know I have the possibility of recovering the screen by welding and cleaning or I also have a screen that has the broken flex those little teeth look in good condition there is some possibility of changing it, thanks
⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Kis 2 Max
Hello, I would like to ask you, I have the zte kiss 2 max and when I turn it on, the screen stays blank looking for information I found that the most likely is the flex however I noticed that it was overheating at the bottom of the screen (where is the buttons home, etc) and when I disassembled it, I saw that on the flex tape that is attached to the screen the teeth on one side were damaged as well as a battery when vomiting, to which I would like to know I have the possibility of recovering the screen by welding and cleaning or I also have a screen that has the broken flex those little teeth look in good condition there is some possibility of changing it, thanks
Zte kiss 2 max blank screen
6
hace 5 años
hace 5 años
Hello, I would like to ask you, I have the zte kiss 2 max and when I turn it on, the screen stays blank looking for information I found that the most likely is the flex however I noticed that it was overheating at the bottom of the screen (where is the buttons home, etc) and when I disassembled it, I saw that on the flex tape that is attached to the screen the teeth on one side were damaged as well as a battery when vomiting, to which I would like to know I have the possibility of recovering the screen by welding and cleaning or I also have a screen that has the broken flex those little teeth look in good condition there is some possibility of changing it, thanks
460
hace 5 años
hace 5 años
Regards. Reconstruction is a long-time job if you don't have the necessary experiences and tools.
we are talking about you need to have
tin 0.4mm in diameter
at least a microscope or a magnifying glass of more than 500X
enameled wire as thin as a hair (you can use the one that comes in the hands free to recycle)
good lighting.
captin fine point
The idea is to bridge the pins of the LCD and the board.
The quality of the photo does not allow to see in what conditions it is what you indicate. Can you upload a photo of everything you indicate to be able to orient yourself?
¡Aprende a reparar con estos cursos YoReparo!
Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off
Yamil Alarcón
$ 29 USD
$ 12 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad