Washing machine lg fussy logic makes a strong sound when washing.
Good afternoon friend Victor, sorry for the delay I tell you to download the transmission and the axes as well as the top and bottom have game. And I have opted to repair the transmission since I have access to a winch. I uncovered the transmission with the winch and already manufactured the bushings and they looked great, now I would like to change the internal plastic sprockets but my doubt is with the measure of them xq those that I have have a little wear.
Greetings MAKESI2013._ I do not have this information._ However, I disassembled one of the Samsung of smaller capacity and the measures I have are: _height = 18.65 mm _ / _ diameter = 27.50 mm .___ There are three plastic sprockets that in turn They are meshed with the toothed system that is on the inner wall of the widest part of the transmission case to ensure that the three sprockets remain centered on their own axes.
my friend, for not answering before I tell you that I managed to repair the transmission and that it was not easy, after disassembling I found water in the part of the planetary internal gears which dried the grease and damaged those sprockets. I tell you that I made the bronze bushings on the lathe of the company and the pinions on a milling machine I made them from Nailatron. Assemble it very carefully and weld the lid of the box. So far the washing machine works very well. Thanks everyone for your help.
Greetings MAKESI2013.-We are glad to know that you were finally able to repair the transmission case.-The entrance of the water inside the box was due to the expiration of the seal located on the inner upper shaft a few millimeters from the top of the housing of -the transmission box.-If you replaced it you will not have problems in the future.-That everything continues going well and thanks for your contribution.-Thanks and Regards.
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
