It also happens to me that the cap is as large for the space of the backpack and it is difficult to put it in. [Img] https://i.ibb.co/n7zgNrs/20190901-181752.jpg [/img]
⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Sanitary
The float arm broke and I have to put everything together
11
hace 5 años
hace 5 años
Hello friends.
Trying to fix a loss in the toilet broke my float arm (see photo)
The issue is that I don't even know where it goes.
They would tell me where I started to fix this that I can't use the bathroom please!
Thank you
It also happens to me that the cap is as large for the space of the backpack and it is difficult to put it in. [Img] https://i.ibb.co/n7zgNrs/20190901-181752.jpg [/img]
It also happens to me that the cap is as large for the space of the backpack and it is difficult to put it in. [Img] https://i.ibb.co/n7zgNrs/20190901-181752.jpg [/img]
138.835
hace 5 años
hace 5 años
Hi. You have to buy the replacement and you will intuitively realize where it is going. You have the weird colored piece where it is mounted. On its axis is the closing mechanism. To place the new arm, remove the plastic bolt that it should have (the photo is blurred) and the broken piece will come out. Place it in the only position that goes and place the bolt again. It should be everything. I leave you a picture of the pieces. regards
11
hace 5 años
Do I have to loosen to remove it from the water coupling nut?
https://i.ibb.co/RhY2rfq/Frame-2.png
62.202
hace 5 años
hace 5 años
Hi
I recommend you buy a complete float just like that new one and replace it
If you just want to change the arm, I think that model does not come as a spare. Cut the water and loosen the bronze nut that connects it to the tank, remove the float and place a new one in its place in the same position as the original
advice:
Tie a long thread to the float and at the other end tie it to any other side on the outside or to your hand, in case it falls and goes to the bottom of the tank, so you could easily recover it
the shutter or closing buoy is normal that it costs to put it, it is not large, it is the appropriate measure, if that sealed well do not change it
regards
11
hace 5 años
To get it out I have to loosen which nut? (see photo I uploaded here https://i.ibb.co/RhY2rfq/Frame-2.png)
11
hace 5 años
I have to buy a spanner for that and I don't have any, which one do I buy?
Type is: https://articulo.mercadolibre.com.ar/MLA-655247972-pinza-llave-inglesa-stilson-12-ajustable-para-cano-ap-55mm-_JM?quantity=1#reco_item_pos=0&reco_backend=second_best_navigation_trend&reco_backetype = function & reco_client = home_second-best-navigation-trend-recommendations & reco_id = 7df210c0-2471-4b15-a689-83c220cd43f0 & c_id = / home / second-best-navigation-trends-recommendations / element & c_element_order = 1 & c_uid = 8b605d7a-d782-44-a4d4d-a4d4d-a4d4d-a4d4d-a4d4d-a4d4d-a4d4d-a4d4d-a4d4d-a4d4d-a4d4d-a4d4d-a4d4d-a4d4d-a4d4d-a4d4d-a4d4d-a4d4d-a4d2d4d-a4d4d-a4d2d4d-a4d2
62.202
hace 5 años
The one I use is an 8 "French wrench, it would be like the second one you showed but a smaller measure, what you should be careful is that it has enough opening for the nut in question. The 10" one that appears in the publication has an opening but the head is very large for the place and may not enter
The wrench of the first publication is for something else, directly that is not
62.202
hace 5 años
How to recommend .... bahco is the best
Stanley option
But for that particular job as no strength is required, any quality is useful, just keep in mind the opening and head size
Preferably buy it personally at any hardware store, free market sometimes they do not send you what the photo shows or says the description
19.266
hace 5 años
hace 5 años
hello: you have to change the full load valve I asked for an imnsa valve, if it is a male thread or a female thread, the ideal push button comes in plastic also changes the rubber of the shutter greetings
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación
Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad