⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Sanitary

Cold water in hot water pipe

carlosa1302
hace 5 años
hace 5 años
I have a problem, my boiler does not raise hot water, I already change it for a new one and the same problem follows, the boiler turns on and feels the hot tubing ... but it does not reach the showers or the hot water taps ... it just comes out warm ... I did a test .... disconnect the hot water hose from the boiler and opened the main tap ... according to me, only water should come out of the hose that is disconnected from the wall but if boiler, however .... pressurizes water from the hot water wall tube .....
carlosa1302
hace 5 años

Leave review ... thanks for the comments ... greetings

Responder
servimat1
servimat1
138.835
hace 5 años
hace 5 años
Hi. Is it a new or old installation? Do you have any taps connected to a washing machine where the water is mixed? It would not be normal for pressurized water to flow out of the wall. If at some point the waters are mixing it will always come out warm. Regards
carlosa1302
hace 5 años

If I have a washing machine connected ... and I was pouring water because the hot water hose is filled with scale and this I look for exits ... my keys have a security key, check closing the keys to see if it was mixed ... Peroooo Connected the hoses, I would need to see if they really sealed .... On the other hand I have my main shower on the top floor that is now canceled ... this is not used because supposedly the floor the emboquillado no longer served and was transferring water ... on the other hand the mixer no longer works because the trees or scallions no longer seal ...

Responder
servimat1
servimat1
138.835
hace 5 años

Possibly there, in this faucet are mixing hot and cold water. Remove the stems (trees) and change the valves. Surely at some point the waters are mixing.

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.94
(16)

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación

Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis