⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Sanitary

1 / "hp pedrollo pump does not suck strongly

Luis Marquina
hace 5 años
hace 5 años
Good morning, I have a 1/2 hp pedrollo pump that at the time of sucking the water made it poorly, the mechanical seal was changed and at the time of testing it it continues with the same problem, can you please help me to solve that trouble?
Edurau
Edurau
835
hace 5 años

You do not say from what depth or from which reservoir you suck the water, but, a centrifugal pump does not have the capacity to "suck" from a great depth, one of 1/2 Hp. not much more than 4 meters, at most! Therefore, even if you change the pipes, seals, cables, and pray to the saints of the deep waters, you hardly have a solution, without counting on the resistance to the passage of water they offer, fine pipes, curves, elbows, "T" and stopcocks and everything else. luck

Responder
servimat1
servimat1
138.835
hace 5 años
hace 5 años
Hi. Did this pump work before doing this job? Regards
Luis Marquina
hace 5 años

If but poorly, change the mechanical seal and the problem persists, pressure is felt but no water is drained.

Responder

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.94
(16)

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación

Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis