✅ Flexible adjustment single lever sink

buchiniz

9

hace 5 años

Hello, how are you. I have a mono spherical c35 Genebre sink command, my question is how do I adjust the flexos of the monocommand, some special key comes because it is inside the monocommand and I have no room to adjust the flexes.

Comentar

SANGARBI

6

hace 5 años

Hi. Fix that you have to be able to disassemble the body of the monocommand and usually adjust with a fixed key number 11

Comentar



elektomaq

62.202

hace 5 años



hace 5 años

I really do not think that the flexible nut is so inside that its adjustment is not possible From what you say, I think the monocommand is mounted without the flexible ones, in that case the hexagon would be hidden inside the hole. What you should do in that case is to disassemble it, place the flexible ones and reassemble it with the flexible ones placed These flexible do not require a great fit since they seal with the o`ring Regards

Comentar

servimat1

138.835

hace 5 años

Hi. Indeed it is as mentioned by friend Elektomaq. With an adjustment at hand is enough. A few weeks ago we changed the faucet in my house and I had the same case. I made the consultation in PV since the adjustment nuts were at least 10 cm inside the body and they told me that only with one adjustment by hand was enough. What I did extra was to put a little graffiti grease to avoid the "ring" wrinkle and not seal well. Regards

Comentar

Flexible adjustment single lever sink

Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

Reparación de Placa Main TV LED con el Ing. Picerno

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación

Curso TV OLED y QLED con el Ing. Picerno