Blind well fills quickly.
Sorry .... I'm going to continue my question here because I published without wanting to, I don't know how to edit and it wasn't over ..... well, I have an old hole 2 and a half meters from the well ...... if I I put a pump? Is it possible that I can lower the level of the napa so that the well does not fill up so fast?
It is a well that is dug with a special machine at great depths and then a pipe is placed in the drilling. This allows you to reach great depths away from the napas. S use "common" sewer pipes of Ø 100 mm for jacketing. In this type of well, a deep napa is usually reached that has no contamination problems.
I just want to lower the water level of the well, so I thought about putting a pump in that old hole that is 2.5 meters away. from the well (it was from an old hand pump), will it be possible to go down and not fill up so fast?
The water you take out will have an odor - obviously I don't intend to use it, but it's true, I'll have to see what to do with it.
If they belong to the same middle napa as you would have to have the bomb walking all day. Depending on the age and capacity of the napa, it may be filled or restored often and constantly. I think the solution would be a well tubed as I told you or to make the well somewhere else, far from the napa. I leave a link for you to see how these wells are.
http://desagotesencordoba.com.ar/pozos/
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación
