⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Sanitary

Problem with universal heating CU 145 S

sam1963
sam1963
16
hace 6 años
hace 6 años
Good afternoon. I tell you that this water heater was working very well. Now I discover that being in a minimum position, when opening a bobbin, they light the burners correctly and that when the knob is turned to raise the temperature, the flame rises to the midpoint and does not grow any more, even placing it at maximum. In turn, if a stove burner is lit, I notice that when the heating knob is raised to the maximum, the flame of the burner shrinks in half ... I took it apart to clean it, especially the burners and others and I don't find the problem; Could it be the natural gas regulator that is at the entrance next to the meter? any suggestions ?? I enclose photos of the water heater and the regulator. Regards. calefón.jpg [104.96kb] [url=/ver-adjunto/aHR0cHM6Ly9hZGp1bnRvcy55b3JlcGFyby5jb20vZGVmYXVsdC8wMDA0Lzc0L3RhcGEtNjQyOTQuanBn] [img] /js/ckeditor/pgta/pg.jpg/pgng.jpg/plung/pk.jpg [url=/ver-adjunto/aHR0cHM6Ly9hZGp1bnRvcy55b3JlcGFyby5jb20vZGVmYXVsdC8wMDA0Lzc0L21hcmNhLTE0Mjg0LmpwZw==] [img] /js/atta/atta/atta/atta/atta/atta/atta/atta/atta/atta/atta/atta.at
Ricardo Ab.
Ricardo Ab.
5.181
hace 6 años
hace 6 años
Hello Cut the general gas tap and verify that the regulator filters (usually a finite maya) on the side of the inlet (copper pipe) are not blocked Regards
sam1963
sam1963
16
hace 6 años

Hi Ricardo, I will verify what you tell me, I did not know that the regulator had that filter at the entrance. Then I tell you.
Regards.

Responder
servimat1
servimat1
138.835
hace 6 años
hace 6 años
Hi. It can be the regulator since it looks has its years. Possibly the internal rubber is hard and does not regulate the gas flow well. What if, before changing it, do not forget to check the filter mentioned by your friend Ricardo. Regards
Greenmaster
Greenmaster
2.849
hace 6 años

Insufficient gas pressure from the network to feed all household gas appliances. I recommend you notify the supplier company to check your outdoor installation

Responder
sam1963
sam1963
16
hace 6 años

Hi servimat1, I had thought about the regulator but I don't know how to try it; I will do what they suggest with the filter and then I will tell you.
Regards.

Responder
sam1963
sam1963
16
hace 6 años

I forgot, in case of having to change the regulator, how to know how much capacity corresponds? I clarify that this regulator and the meter attend two houses that are on one land, since in the front of the property there is no place to place another box ... we talk about 2 kitchens, two heaters, a heater, a hot water tank in total.
Thank you.

Responder
sam1963
sam1963
16
hace 6 años

Hello, I tell you that I disconnected the copper pipe from the regulator and my surprise was that when I opened the main key a slight blow came out without the necessary pressure from the network. So I decided to call the service provider to come check the problem. When I solve it I will comment, it seems that the greenmaster friend was right.
Regards.

Responder
sam1963
sam1963
16
hace 6 años

Well, I commented, the ecogas technician came and observed that the copper pipe that connects the main key with the regulator was covered and that this pipe was for bottled gas and not for natural gas ... he proceeded to change it and I He suggested that the regulator be changed because it had no filter at the entrance and it was probably trash.
I want to thank those who guided me for their time and dedication.
Regards.

Responder
sam1963
sam1963
16
hace 6 años

I close the query by giving servimat1 the solution because I don't know how to give it to greenmaster.

Responder
Greenmaster
Greenmaster
2.849
hace 6 años

Thanks are not necessary

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis