Hi, I have a newly installed vessanti shower panel. Lose a lot of water from the transfer rod. It is 3 ways since it has a flower, shower and jets. Disassemble the stem x if there was something loose, broken or poorly accommodated but I failed to fix it. Test without the pressurizing pump in case the pressure was too much. It is not that either. I would change the stem but I don't know which model can be adapted. I don't get the vessanti replacement. Of course I appreciate any advice. Regards!!

Hello, finally disassemble the stem completely again. I took out all the plastics and put Teflon covering the 2 gummies (oring) it has. Heat the Teflon a little to stick it and voila. For now it works barbaric. The problem was that there was a small game between the rod and the selector. The latter is a precarious arrangement (it has been running for more than a week). If over time, it fails, you should get 2 orings a little thicker. Thanks for the opinions !!! regards!!