⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Sanitary

Shower key went out.

daniel88v8

hace 6 años

Hi, I broke the cold water faucet in the shower. I took the key to a hardware dealer but he told me that I have to take the measurement of the screw. and I wanted to remove it but it is the one that opens the water, and I have no idea how to remove it. some recommendation for a turnip that does not know anything about taps :)

Comentar



elektomaq

62.202

hace 6 años



hace 6 años

Hello you must remove the bronze screw ... if you can not with a screwdriver you can use a clamp or pliers and hold it tightly from the head and turning counterclockwise, it comes out. Surely first you will open the water passage until you reach the stop and then the screw regards

Comentar

daniel88v8

hace 6 años

I work, thank you.
now I guess with the screw I can give the correct knob



Responder

elektomaq

62.202

hace 6 años

the screw can be 4 mm, 5/32 or 3/16 depending on the type of head. The flywheels are independent of the screws that they bring for their fastening, in fact what interests is the type of insert or insert that has the stem or cabezal
the fact of removing the screw allows you to extract the rest of the insert or other broken parts that were gripped the head. that is what you have to extract and carry of sample along with the steering wheel so that they give you an equal with the suitable insert
greetings and luck



Responder

servimat1

138.835

hace 6 años

Hi. There are many types of volantas. You have to check if it is thin or thick streak. They come square too. The screw is usually 5/32 brass / brass. regards

Comentar