Hello, I have a doubt with a DIN timer. In L the live is connected, in the N the neutral, but in 1 and 2 you put what you want to cut, that is to say another Live in the 1 for the continuation of the live in the 2? Can you imagine making a direct bridge between L and 1? I enclose the diagram. [url = / ver-adjunto / aHR0cHM6Ly9jZG4ueW9yZXBhcm8uY29tL3VwbG9hZHMvZGVmYXVsdC8wMDAzLzM3L0lNR184NzA0LTQxNzAuSlBH/png_png/png.png/png_png/png_png_png/png_png/png_png_png_png_png_png_png_png_png_png_png_png.png https://photos.app.goo.gl/TFwDC8CouNqHZ8xA3 Thank you,

Hello The phase goes to L and 1 The neutral goes to N And the return goes to 2 Making a bridge between L and 1 for practical purposes is the same as bringing two cables from the phase, what happens is that certain regulations do not allow jumping from one terminal to another but if you observe the drawing well the bridge is Regards