⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Household Electricity

Saver bulbs that burn in two or three days

Bianchi
hace 5 años
hace 5 años
Greetings in advance, at home I have in use saving bulbs and they burn very frequently, socket well, switches well, where is the cause, thanks!
eldona
eldona
296
hace 5 años

Hi Bianchi, did you measure your line tension? Do you consider the quality of the lamps?

Responder
Bianchi
hace 5 años

If they are rayovac lamps with one year warranty, I live in the Dominican Republic where the electrical service is very poor, I must work with a voltage reducer to get 110v, if the 220v goes up the 110v also goes up sometimes it stays at 130v

Responder
HATSUNNE0
HATSUNNE0
167
hace 5 años
hace 5 años
Be sure to replace capacitors with a voltage greater than the voltage that arrives if it is 110 or 220V and check if it has varistor in most cases, when there is a voltage rise they cause over voltage on it and this is damaged by melting fuses or protection resistors
Bianchi
hace 5 años

Very curiously when I check the voltage, the negative signal gives me as if it were a phase, the probe shows me strong light in the phase, in the negative a little dimmer

Responder
elektomaq
elektomaq
62.202
hace 5 años

Hello That can be a problem, how many phases are in your house?

Responder
nastor
nastor
17.232
hace 5 años
hace 5 años
Hello That usually happens because of high voltage, that is, the voltage is very high in your home (as friend eldona told you to measure voltage), or the lamps are for less volts. It is rare, but it has happened, to have lamps of a defective game. Regards
eldona
eldona
296
hace 5 años
hace 5 años
Bianchi, then maybe there you have the inconvenience of an unstable tension and with surges. You can try placing a varistor or arresters in each bulb of a voltage that allows you to filter the voltage peaks or power your lighting network with a failing stabilizer. I hope I can help you. Regards.

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.73
(22)

Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos

Maximiliano Resch
$ 40 USD
$ 20 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis