I need to know how to connect or to which terminals the 4 centurion receiver cables are connected so that the card works with control. the centurion white red black white wires where I should connect them, please help. thanks.
⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Electric gates
I need to know how to connect or to which terminals the 4 centurion receiver cables are connected so that the card works with control. the centurion white red black white wires where I should connect them, please help. thanks.
DA2XS Beninca card connection problem
21
hace 5 años
hace 5 años
I need to know how to connect or to which terminals the 4 centurion receiver cables are connected so that the card works with control. the centurion white red black white wires where I should connect them, please help. thanks.
346
hace 5 años
hace 5 años
Good morning, on terminals 6 and 7 of 24v power supply, on 8 and 12 the other two cables, at 11 you must place a bridge at 8 but you will connect photocells to the system since it works NC
Cheers
21
hace 5 años
Ok thanks for the information I will verify and I comment. Thanks in advance. The bridge between 8 and 11 is mandatory unless I install a photocell on those same terminals. Right.?
346
hace 5 años
Exactly, if you install a photocell it must be in those terminals and the NC and C terminals of the photocell
¡Aprende a reparar con estos cursos YoReparo!
Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos
Maximiliano Resch
$ 40 USD
$ 20 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad