Hello, I am having this problem, my PPA electric gate, when you open the gate it does not recognize the end of the race. Of course, as a top already open, it stops. The issue is that when you press the remote control again instead of starting to close, turn the gear to continue opening. That is open but not close. Details: if instead of letting it reach the end you stop it with the remote control, then IF it closes. But if it reaches the end, then what I explained before happens and does not close. Both magnets (has one on each end are fine). and they pass in front of that kind of sensor that is fixed, but still doesn't stop. I tried with larger magnet and slightly changing the positions but nothing changed. What I can do?

This is how it is now, the red and black wires come from the sensors. And they are plugged into the pins on the right, leaving one free, but if I move it and plug it over the left, it is the same instead of turning in one direction, the pinion turns in the other but still does not stop where it should. Any idea what to do?