⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Building

Horizontal insulating layer

polo666535
hace 5 años
hace 5 años
hello the insulating layer is revoked and then it passes azfaltica paint? and then continues to make wall? I ask why I see bricklayers who revoke it (von hidrofugo obviously) when all the walls are finished
servimat1
servimat1
138.835
hace 5 años
hace 5 años
Hi. In theory, water-resistant whipping is only a layer of a minimum of 2 cm composed of sand, cement and water-repellent. Asphalt painting is not necessary since you remove the so-called "vapor barrier to the wall". Many masons because of ignorance do so and make the environment very humid. regards
polo666535
hace 5 años

I think I did the question wrong, is it the same to revoke the layer (common bricks glued with the mixture you say) before continuing to lift the wall ???

Responder
servimat1
servimat1
138.835
hace 5 años

I do not understand, less than before.
Do you have the wall already built with bricks and want to waterproof them?

Responder
servimat1
servimat1
138.835
hace 5 años

sorry. The one that I misunderstood is me. You want to make a horizontal layer, I thought it was vertical. It is indeed as you say. The foundation bricks are made, encased or formwork about 3 to 5 cm, Ø 8 mm iron is placed and concrete is placed with water repellent. Once dry, allowing 3 to 4 days to pass, you apply asphalt paint and a piece of plastic film (they are sold at hardware stores) and then start with the wall.

Responder
polo666535
hace 5 años

Thank you very much !!! I did not know that you had to put an iron

Responder
servimat1
servimat1
138.835
hace 5 años

Nice to help you. Indeed, the layer should carry iron to prevent cracking or cracking.

Responder

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.73
(22)

Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos

Maximiliano Resch
$ 40 USD
$ 20 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis