⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Building

Chained council

Juan Francisco9
hace 5 años
hace 5 años
Good afternoon, I am raising a room of 10 x 3.5 on a crockery, I am raising it with hollow brick of 12. On the stretch of 10 I have three columns to concretize and above the lintels I put prefabricated beams. The fall of the roof is going to be two water, bone 5 for each side. The subject was the subject that above the lintels I made a fine hole with an iron of 6 and cement. And now I realize that the height is fine to begin with the race and placement of the profiles. My question is do I need to make a row with brick and concrete? Or that row will reach me?
oscar yasinski
hace 5 años
hace 5 años
HELLO FRIEND, IF HEIGHT IS ACHIEVED TO YOU, WHAT IF YOU'LL HAVE TO COMPLETE IN PARTS WITH COMMON BRICK BECAUSE YOU'LL REMAIN THE SCALES, YOU CAN'T COPY PERFECT. MAKE YOU A GOOD TERMINATION, A GOOD LINE SO THAT YOU DON'T MUCH WORK THEN PLACED THE ROOF. ALWAYS GIVE YOU GOOD FALL, IF YOU ARE OTHER THAN IT IS NOTHING NOW IF LACK IS PROBLEM. COUNCIL NOMAS. NOW THE KEYS, STRIKES, OR WHAT YOU'RE GOING TO USE, I RECOMMEND YOU TO LOVE THEM WITH A TRINK OF 4.2 OR 6 UNTIL THE CHAIN DOWN, FOR YOUR GREATER SAFETY. Then he revokes and doesn't see himself. GREETINGS .
Juan Francisco9
hace 5 años

Hello, thank you very much for your answer. I thought that a single row with a hole was little, but in turn I thought that it is not much to endure, so thanks for the answer. Of fall I will give 10 cm for each meter and the profiles I will put every 60cm

Responder
Juan Francisco9
hace 5 años

How about?

Responder
oscar yasinski
hace 5 años

RE GOOD, GREETINGS

Responder
Juan Francisco9
hace 5 años

Thank you

Responder
servimat1
servimat1
138.835
hace 5 años
hace 5 años
Hi. Did you chained upper? You must "close" the entire perimeter with a continuous line of concrete and irons minimum Ø 8 mm. This will prevent the walls yield over time due to the weight of the roof. It is not that it will fall if you do not but you will always have cracks. On the other hand, without this continuous chaining, the structure will not be seismic. regards
Juan Francisco9
hace 5 años

Hello, what I was saying was that I planned to make a row of brick or concrete, but I made a row of hollow brick and 6-iron glued with cement. And I realize that that height is enough for me to drop the ceiling .. Doesn't it reach that row I made? Remember quesroy on a crockery, that I have 3 columns in the 10 meters and that also to the subway. It has a filme of cememto and iron

Responder
Juan Francisco9
hace 5 años

And this area is not earthquakes, and luckily there never were.

Responder
servimat1
servimat1
138.835
hace 5 años

If they are the hollow U-shaped bricks they are the correct ones for the upper chain. What yes, the anti seismic facilities are made to prevent, not because there are. Who guarantees you that there is not one at any time?

Responder
Juan Francisco9
hace 5 años

You're right nobody guarantees that. Not the bricks that glue with cement and iron are from the holes of the common 12. So you say it is no good should I go a little higher and add the u? Or if I make another row with iron and cement, it doesn't work either. Sorry for ignorance.

Responder
servimat1
servimat1
138.835
hace 5 años

Do if or if the upper chain or closing ring. You can do it with formwork filling with concrete / iron or using the U designed for this purpose. You will climb the entire structure about 20 cm but it is something safe and legal.

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis