HELLO GOOD NIGHT. THE PROBLEM I HAVE WITH THIS WASHING MACHINE, IS THAT IN A FEW MONTHS AGAIN I BEGAN DIFFERENT FUNCTIONS WITHOUT ONE PROGRAMMING THEM AS WELL AS CALIBRATIONS OR THE TINA FILLED WHEN I HAD A FILLED LOW, STOPPED ONLY, DRAINED ONLY AND BEGAN WHAT AND WHEN I BURNED EVERYTHING WAS ALL IN PAUSE OR ONLY THE GREEN FOCUSES WERE LEFT AND WITHOUT MAKING ANY FUNCTION. UNLESS THAT IT WAS NO LONGER ON, BRING A TECHNICIAN DEDICATED TO THE REPAIR OF WASHING MACHINES AND IT RESULTS THAT THE CARD WAS DAMAGED AND REPAIRED IT, RETURNING FROM THE REPAIR IT WAS PLACED AND ONLY STARTED AND BEGAN AS CALIBRATIONS AND BEGAN ONLY HE DID A NORMAL WASHING AFTER THEY STOPPED AND DETECTED OFF AND NO LONGER. I HAD TO TAKE A GUARANTEE AND THE REPAIR TECHNICIAN TELLED ME THAT THE FIRST TIME HAD A SOURCE PROBLEM AND THAT NOW IT WAS AN ALTERATION OF SOURCE AND THAT THE CARD WAS DISPROGRATED AND FOLLOWED AGAIN, IT WAS PLACED AGAIN AND ONLY ORDERED THAT I MADE A LOAD GIRL OF WASHING AND ONLY THE FULL BUT EXTRA BIG LOAD AND ONLY OFF. WHAT I DO? I WOULD LIKE TO FIX IT, I HAVE LOOKED AT TUTORIALS AND ONLY SAY THAT I CHANGE ACTUATOR AND OTHERS SAY THAT ONLY THE CAPACITOR CHANGES ON THE SIDE OF THE ENGINE. I WOULD LIKE TO KNOW IF YOU HAVE ARRANGEMENT OR I CAN MAKE IT DIRECT OR MANUAL WITH RAT TAIL SWITCHES TO NO LONGER BATTLE. I THANK YOU FOR YOUR HELP.