⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Whirlpool
washing machine whirpool error1
16
hace 5 años
hace 5 años
hello people, I have a problem with a washing machine whirpool wfe61a. marks me error 1 and I did the test to change the drain hose and the pressure switch, but the fault continues. I put it in the program to drain it and when it reaches ten minutes it starts to mark the error 1. what could it be?
PD: apparently error 1 is pump blocked.
23.662
hace 5 años
hace 5 años
Hi, first check both the pump side and board side and wiring connectors in good condition without overheating, the error is also associated with this. Regards
16
hace 5 años
Is there any way to do a factory reset from the commands; as a last step before changing the board?
23.662
hace 5 años
Hello, what you can do is place a test lamp on the pump terminals, when the drain arrives it is brightly illuminated and if at some point its brightness drops or goes off, you already know that the problem is electronic board, case On the contrary, the luminosity is maintained but it does not drain is a discharge pump problem. Regards
16
hace 5 años
Hi. I could find the problem mentioned above. It was a card that goes from the pressure switch to the plate. Thank you very much everyone!
23.662
hace 5 años
Hello, I am glad that you have solved the problem of your washing equipment, you have an excellent weekend. Regards
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad