⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Whirlpool

Washer Whirlpool 16kg Lava without force centrifuges properly

Jose Luis Reyes

hace 6 años

Good day friends I have a washing machine whirlpool 16Kg model 8mwtw1615cm0 that was flooded, since then lava sinfuerza, but centrifuges correctly. The transmission has already been changed and the problem continues. What I have noticed is that the actuator in the next position fails ...

But in the next position, which is when he is arranging clothes, he has a lot of strength ...

What to do?

Comentar



Fermin 007

57.307

hace 6 años



hace 6 años

I can not imagine how far the water got, but if they put it to work so wet maybe it affected the electronic card, but the actuator is the same? also the capacitor? Change the capacitor and calibrate it, it is cheap, before leaving with the card, now if the actuator was wet, check it well, greetings

Comentar

Jose Luis Reyes

hace 6 años

Thank you very much for your help friend, in the end it wasn't exactly that ...



Responder

Jose Luis Reyes

hace 6 años

Thank you for your attention, in the end it was an adapter that I attach below ...

As you can see the gear is swept and had nothing to do with the flood.

Comentar

Fermin 007

57.307

hace 6 años

Thank you for sharing the solution, but I have a doubt, that piece goes down the agitator, it is assumed that you changed the new transmission and by force when changing it, you had to remove that piece, it is strange that you have not seen it swept, but anyway , the best thing is that you solved, greetings and Merry Christmas.



Responder

Jose Luis Reyes

hace 6 años

Friend I am a Computer and Administrator, I don't know anything about washing machines but it has helped me a lot to read this page. I started by changing the transmission because someone who is supposed to be dedicated to that had already thoroughly reviewed it and that was the diagnosis, but was not available to finish the job.
In the end, I got tired of not finding honest and responsible people who could entrust the repair and I undertook the adventure of repairing myself.
That is the reason friend, once again, thank you very much for your support.



Responder