Hello to the forum ... the failure of the washing machine is not always, but on several occasions it makes the circuit breaker trip as soon as a program is selected ... I did the following tests disconnecting all the peripherals, such as motor, resistance, pump, deworming filter, cable earth, less platelet programs ... and the problem persists. Well ... I have discovered that in the outlet there is no third cable, the discharge to ground ... but if there is a cable with javelin on the board of the house. On several occasions I have had similar failures in other washing machines in the workshop, but I have solved them by removing the parasiticide filter or replacing it. My questions are: is it possible that there is a leak to the housing of the washing machine (rare because I have disconnected the ground wire), that the platelet fails ?, that the circuit breaker fails or is it very sensitive ?. Now if it works well when plugged into an outlet connected only with the thermomagnetic key ... someone with any opinion would appreciate ...

Hello, check with a multimeter, if there is a leak to the housing, if there is none, it cannot be the washing machine. Regards

Hello, it is very likely that the problem is in the outlet, it does not matter if you do not have the ground wire because the circuit breaker still detects leaks.

Something very similar happened to me. In the eagerness to solve the problem, the third time I tried everything connected again and not accusing any problem ... I load it with clothes and start walking, as soon as it started ... I burned the plate. Luckily the machine was mine and not from a customer!: |