⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Samsung

good night .. I am repairing a Samsung washing machine ..

Fuera Maduro

hace 5 años

I work a washing machine ... the card sends 110 volts to do the whole cycle, but when it reaches the centrifuge, the guaya (the closh) does not work and the drain pump is the same .. I check with the teste and mara 70 volts .. I disconnect those two pieces and the current reaches 110 ... it is as if installing those pieces the current drops in half ... you can help me

Comentar

Fermin 007

57.307

hace 5 años

It could be that any of the 2 pieces is short, check them by connecting each one directly to see if they work well, this to discard.

Comentar

Fuera Maduro

hace 5 años

Hello good day. I have already tried both pieces directly and it works well, directly ... the fridge is Samsung brand, model WA16J6710LS, the mice had eaten the wires, I made the change of 60% of the wires and terminals. The problem happened that at the time of placing tape a phase that goes to the drain pump made short, there began the problem .. before that it worked perfectly ...



Responder

Fuera Maduro

hace 5 años

sorry is a WASHER



Responder



lusangor

56.366

hace 5 años



hace 5 años

Hi Connect a lamp to the wires that reach those 110v. and check if it turns on, if it doesn't, that voltage is not real and the problem is with the board, possibly with the triac and resistors that control those peripherals You already commented, Cheers

Comentar