⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Philco

does not work spin

alenobtecnico
hace 5 años
hace 5 años
Good people, I am seeing a philco wm-ph08 washing machine, when activating the spin it starts to drain the water and when it starts spinning for the clothes before spinning it only turns clockwise until it turns on the spin and it shakes a lot and stops For security, I want to know if it is platelet failure, thank you very much
alenobtecnico
hace 5 años

I test it in a vacuum, it starts to spin the turbine alone, just dragging the drum, it costs several times and when it is activated it does the same, always turning clockwise until it engages completely but it shakes so much that for safety it cuts and stops

Responder
alturasbal
alturasbal
27.174
hace 5 años
hace 5 años
hello, check, if at the beginning of the spin it turns only the turbine causing the clothes to roll up and the basket is dragged by that clothes bun, if so, it may be that the drain motor does not completely retract the clutch arm or The crawl spring has broken, check this and comment, regards.
Ernesto0
hace 5 años

I agree with the comment above that spring is the one that is broken you need to change it and problem rwsueltonsaludos

Responder
alenobtecnico
hace 5 años

I test it in a vacuum, it starts to spin the turbine alone, just dragging the drum, it costs several times and when it is activated it does the same, always turning clockwise until it engages completely but it shakes so much that for safety it cuts and stops

Responder
alturasbal
alturasbal
27.174
hace 5 años

If the drain motor retracts then the internal spring of the transmission is damaged, greetings.

Responder

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.73
(22)

Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos

Maximiliano Resch
$ 40 USD
$ 20 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis