⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Philco

horizontal hole in Cuba

waltercab

hace 5 años

hello, in the outer drum a hole was made by rubbing it with the chassis. It is at the top, I want to fill it out. I can use epoxy glue, resin, contact cenento or the droplet. It is a top-loading washing machine. [Img] https://cdn.yoreparo.com/uploads/imagen_post/0002/56/73d8e3243925284a730ab8fd5cf043bdfa7fc592.jpeg [/img]

Comentar

alturasbal

27.174

hace 5 años

Hello, you can make a patch with glass wool and resin, it is used in boats and it goes well, greetings.

Comentar

waltercab

hace 5 años

Hi, there is repair kit for fiberglass and polyurethane resin. This resin is suitable or I am looking for epoxy. Sls.



Responder

alturasbal

27.174

hace 5 años

Hello, epoxy resin is better because it tolerates the chemical attack of soap, greetings.



Responder



juan guillermo caceres

23.662

hace 5 años



hace 5 años

Hi. The tank does not have to rub against the cabinet when the washing machine works, if it does, check the dampers that are not with a lot of play, if so, you will have to make a replacement and also check the leveling of the equipment. The suggestion by the colleague (greetings) is an excellent alternative solution to seal the tank. Regards

Comentar

waltercab

hace 5 años

the shock absorbers carry some special grease, because they have a transparent and sticky



Responder

juan guillermo caceres

23.662

hace 5 años

No Friend, the lubrication they have is basic since the telescopic barrel has to be without additives since these work as braking of the centrifugal shakes. In your case, I would tell you that the seals are already worn and therefore the filtration of lubricant that makes the shock absorbers no longer fulfill their function efficiently. Regards



Responder

waltercab

hace 5 años

Hi, I bought the new shock absorbers when I placed them, I noticed the hole in the tank, also removed the rust and sprayed the cabinet, the paint spray arrived where the shock absorber pads are housed. The photo I uploaded does not correspond to the shock absorbers, it does not carry that washer. Thanks for the answers. Regards.-



Responder