⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Philco

Washing machine philco PH-708

Peraltalucas9667

hace 6 años

Hello dear today, for the first time I had this washing machine model in my workshop, the problem was that it did not drain and the problem was that the pump turbine was locked with a coin after it was perfect. but I discovered that the pressure switch is not measured in the same way as the others SOMEONE COULD DESIRATE HOW IT IS TESTED ????

Comentar

lusangor

56.366

hace 6 años

Hello, on YouTube there are several videos of how to check, I leave one of them. Greetings and luck

Comentar

lusangor

56.366

hace 6 años

When you have results, tell them. Luck



Responder



luis38

95.432

hace 6 años



hace 6 años

Dear, if it is an electronic pressure switch, special equipment is required to control it. If you want to try it, the easiest way is to disconnect the sleeve and put it to work. Then gently blow through the peak, retaining the air. If the pressure switch is OK, you should cut off the water load and start washing. Regards

Comentar

Peraltalucas9667

hace 6 años

Hi Luis, thank you for answering ........ if that method knew ... what equipment ????? I wanted to know the test form in case the fault indicates that it is the pressure switch and in fact the fault is in the platelet that does not interpret the pressure switch signal well, and in case of not having an extra pressure switch to test ?? ??? I do not know if I explain myself ..... how do I do this test no matter what kind of equipment I try to get it but would you indicate the form please ?????



Responder