Strip error E1 (related to the water inlet) Not only that ... the washing machine enters the cold water (already probe changing the filter and also at different times when there is better pressure in the neighborhood, is that I do not have a water tank) but almost never finishes loading or never leaves of draining the water pump. then the timer practically remains anchored since it never gets even the minimum water load. There has to be a problem with the drainage that does not allow any function to be terminated or rinsed or washed or soaked. In summary; It loses water at the same time as the load. The washing machine is second-hand and has a drum of another washing machine (it is a Frankenstain) and it is still under warranty the Technical Service takes over. But I live far away so I have to be clear about what to claim, ask or perform. Regards. Att, Francisco Belulategui

Hello, the first thing to control is whether the water goes by pump action or by suction effect. for the first one he will listen for the second check the height of the hose and if you have any hose addition that is not from the washing machine remove it and try

Hello I am with the same problem, with a James LSE-1012 washing machine, CONNECTIONS AND CHARGING AND UNLOADING AT ONCE I disconnect the discharge pump and load and wash normal but when connecting the pump permanent discharge, remove the plate at a glance no broken element is seen and no burn is seen on the plate. I do not know what to do.