Hello people, good day. I get the headache, I searched the whole web and I can't find the solution. The washing machine in question, makes all the programs perfect, except the spin, that is, it loads well, it washes well, at the time of passing to rinse it does not spin (sometimes), it loads the water well, it rinses, at the time of passing to the spin In the end, neither does it, it is as if you want to activate the centrifuge but nothing (WITHOUT ERROR IN THE DISPLAY). Now, I unplug it, I wait an hour (sometimes) I put the spin only and it does. I clarify again that it is "sometimes" if you walk with your days directly does not. Disarm everything, in the first place it made a no loud noise, when disarming I found a coin in the pump, clean well and assemble, it works perfect and very serene without noise of anything, but it does not spin, clean the ducts (pipes) and nothing. This weekend disarm the entire drum and clean everything (there was a lot of dirt) was like new, but still not spin. I clarify that there are no noises, it works very quietly but does NOT spin. When it is disassembled, I tried putting water with a bucket and see how it works, it seems that it works well the valve and drains, the fucking thing is that when I do these tests, the spin is good, but when it does a full wash it does not. I also saw how some water remains in the last bend of the drain hose before the valve. Honestly it doesn't occur to me that it can be, some accuse the bomb, but I wonder, when it drains, the pump is going well, why change it? Is it because of the flow? others say changing the plate, this is more expensive, I don't know if I start to change it without knowing if that is the problem. Regards

Hello, remove the belt and see if the engine is spinning, if it is done, carefully rest a piece of wood on the motor pulley and press slowly, if the engine cannot counteract that braking force, it would be in trouble , in case everything is fine, but from centrifugal washing, there is no serious problem with the plate's microprocessor sequence and that doing so sometimes would mean an erratic function. Check and comment. Regards

Good people of I REPAIR, I consult you! I have a philco ph 708 washing machine, it works well, but sometimes it doesn't work and sometimes it doesn't! It does not indicate any errors in the viewfinder! the time it centrifuges it does it with very little force, unless it moves the washing machine a little and there it grabs envion (not always) and when it does not spin it the programs continue running without indicating any error until ending in 0 (zero) but the clothes It is soaked! Can someone help me !?