⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Philco

philco Ph 708 washing machine does not spin

J0EL

hace 6 años

Hello, My washing machine does not spin in the centrifuge, it is heard that the engine is running but the pulley of the box feels locked, it only turns free on one side, already perform all the tests, the platelet sends the signal, the engine runs to both sides, the capacitor is new, I can only think that the box has a problem. What can be?

Comentar

J0EL

hace 6 años

I must clarify that the plate was repaired and the triac were changed since they did not send the signal to the engine. Also perform the test of inverting the motor cables and spinning in the centrifuge but very slow what makes the clothes soaked and not enough to be only wet.



Responder



lusangor

56.366

hace 6 años



hace 6 años

Hello Well, you are not on your way, if the engine is spinning without the belt, the problem is, in the transmission case, it is necessary to observe if the drain motor works at the time of centrifugation, if it works, it only remains, the transmission check. In the following link, more complete information ..... https: //www.yoreparo.com/electrodomesticos/lavadoras/philco/preguntas/6021167/mi-lavaropas-philco-ph-708-no-centrifuga Greetings and luck

Comentar

J0EL

hace 6 años

At the time of centrifuging the drain motor works. This disengages the clutch arm and the pulley of the case rotates in only one direction moving with the hand .. is it correct? Or should it turn in both directions?



Responder

lusangor

56.366

hace 6 años

for spinning, only in one direction, for the other it does not turn



Responder

lusangor

56.366

hace 6 años

Does the motor without a transmitter belt spin?



Responder

J0EL

hace 6 años

If the engine works both ways. What I also try is to invert the motor cables and so if it turns but slow. Can anyone tell me what consumption the engine has in both directions?



Responder

lusangor

56.366

hace 6 años

test the motor in spin, connected to the wiring of the washing machine, in spin, just turn one way



Responder

J0EL

hace 6 años

I already tested it by inverting the cables and it spins in the centrifuge but not at high speed so the clothes are wet. Will the engine not working properly?



Responder

lusangor

56.366

hace 6 años

test the direct motor



Responder

J0EL

hace 6 años

I already tried it too and it works at the same speed for both sides. I don't know how the engine works at a faster spin speed.



Responder

lusangor

56.366

hace 6 años

ok, if the motor is connected to the washer card, it has washing force, but not spin, the problem is with the plate



Responder

J0EL

hace 6 años

Is the plate that makes the engine spin faster?



Responder

lusangor

56.366

hace 6 años

Yes, she is in charge



Responder

J0EL

hace 6 años

It was finally the gearbox. Unlock it by turning the drum hard at the time of centrifugation. Prior to this I had left the motor disconnected electrically so that it does not start to work. I did it this way so that the brake is released and the cluch arm will allow me to turn it. THANK YOU LUSANGOR



Responder