⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Philco

philco ph 708 washing machine does not spin

J0EL

hace 6 años

Hi. I have my washing machine that was repaired because the plate turned on one side only in the wash and did not spin. They changed the triac and now it washes for both sides but the spin makes it slow and the clothes are wet. Change the capacitor and stay the same. The problem will be the plate or the motor?

Comentar

lusangor

56.366

hace 6 años

Hi. If you wash both ways, the problem remains on the plate Regards

Comentar

J0EL

hace 6 años

Won't you have something to see the gearbox?
because I don't know how the engine does to ride faster in the spin



Responder

lusangor

56.366

hace 6 años

the plate is ordered, disassemble the transmitter belt and check if the motor centrifuges



Responder

J0EL

hace 6 años

at a glance it rotates at the same speed in the spin.



Responder

lusangor

56.366

hace 6 años

The turn is good when the drain engine acts, check what the colleague has told you



Responder



luis38

95.432

hace 6 años



hace 6 años

Dear, if the pulley of the box rotates normally, it is possible that the traction spring of the box is damaged. It is the one inside the white gear, on the pulley. Regards

Comentar

J0EL

hace 6 años

the pulley rotates for both sides with the clutch arm on the gear, when the clutch arm is released the pulley only turns to one side. it is right???



Responder

luis38

95.432

hace 6 años

Dear, when releasing the brake, the pulley rotates freely in the opposite direction to the spin and in the other direction it must turn moving to the drum. Regards



Responder

J0EL

hace 6 años

There is the problem that does not rotate the drum or the pulley, try to force it with your hands and don't move even a little. Is there something broken ??? what should i change?



Responder

luis38

95.432

hace 6 años

Dear, according to your comment the box is damaged and you must replace it. Regards



Responder

J0EL

hace 6 años

It was finally the gearbox. Unlock it by turning the drum hard at the time of centrifugation. Prior to this I had left the motor disconnected electrically so that it does not start to work. I did it this way so that the brake is released and the cluch arm will allow me to turn it. THANK YOU TO ALL WHO CONTRIBUTED. IN SPECIAL TO LUIS38



Responder