20190801_170524.jpg [2.12MB] A few months ago I stopped carrying water. It began to load but after 10 seconds it cut. We changed the water inlet pump but it remained the same. The platelet was changed and the washing machine was perfect until a few weeks ago the blade turned. When the washing machine turns on instantly, the pallet starts to spin like crazy and never stops. We bought a new platelet again. When it was connected, the washing machine was turned on and put into the washing process and when it started charging, it went off by itself. Charge went on again, and when the washing process began within 2 minutes, smoke began to flow from the platelet. When we took the plate from the back side, two spots were left as burned. The issue is that those who sold me the plate did not want to recognize me because they say the problem is the washing machine but if I put the old plate it works just like crazy. If it is not the platelet what can be the problem of the washing machine? Or is the platelet and should I continue to claim? Thank you

Dear, I think you should control or have the engine checked, because it is possible that it is damaged and burns the plates. Regards

You should put engine and new layer .. and have the platelet repaired ... take the 2 you have ... so take a triac from one to repair the other