Greetings Mariana Noreña Cano.
Is that appliance top-loading or front-loading ...
If it were front loading .... it will be that your model is the F1200 whose washing capacity corresponds to 25 pounds - equivalent to about 11.34 kilos of dry clothes to wash while for drying only 11 pounds can be processed or its equivalent up to about 5 kilos and no more there.
Comment on it. Thanks and regards.
Edited 02-02-2020.
Statement by Mariana Noreña Cano.
Hi Victor, thank you very much for your response. It is top loading. I think they are approximately 11 kg and then how many liters or gallons do you need to fill up?
Observations by btvictor.
Regards Mariana.
Being a higher load, the ratio is 1 to 7 with respect to the weight of dry clothes in kilograms versus the volume of water in liters considering the maximum volume.
Volume that can vary depending on the load of clothes to be washed because the washing machine has several levels and will automatically determine the weight of the clothes to be washed and consequently determine the volume of water to be incorporated in the plastic tub.
As for the consumption for a complete cycle taking into account the stages of washing - soaping -, intermediate centrifugation - with a water spray -, a single rinse and final spin - without water spraying - we would be talking of about 165 liters of water.
If you are one of those who use fabric softener, it is advisable to select the washing stage only manually and add the softener previously diluted in water and then empty it when filling the plastic tub to the corresponding volume and let it work so that at the end that stage of smoothing, proceed to program the stage of the final spin and ready to hang to dry. That way the fine volume of water to be taken into account for the maximum water load would roll 240 liters.
That additional stage that I commented to you is motivated that in the stages of the rinse they are usually very short in time and the fundamental purpose is to remove the presence of remains of the detergent still present in the clothes. There are those who add the softener at that stage and in the end the material that adheres to the internal walls in the washing machine will have to speak in future washes after a few months.
In relation to electricity consumption, it is necessary to consider the time of the washing stage - soaping -, the time of both stages of the centrifugation as well as the time of the rinsing stage and a very important fact the time of filling the tub of plastic with water. As I do not have the technical data of that particular model, I leave you a Table of the Haceb Assento 650 PR BL washing machine that you can use as an orientation guide ...

The load capacity is in the order of 15.2 Kg and the total volume in about 298 Liters for a consumption of about 421 watts which in other words would be 0.421 kWh
I hope that with that data you can hear about it. Thanks and regards.