⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

LS8012C

Lavarropa longvie 2515 does not spin the motorcycle is doing well

Lavarropas Longvie 2515

Cristian Gonzalez54

hace 5 años

Hello, I have a washing machine longvie l2515 the aguan enters well because when it starts walking it stops and does not spin? What will be the problem? What could the capacitor, persostat or winding be?

Comentar

Hector

152

hace 5 años

Hi mate, the cover of the washer has a sensor, it is usually a magnet that is detected by a magnetic sensor, either is damaged

Comentar

alturasbal

27.174

hace 5 años

Hello, this machine does not have a cover sensor since it is front loading, greetings.



Responder

Hector

152

hace 5 años

They also have senzor



Responder



alturasbal

27.174

hace 5 años



hace 5 años

Hello, replace the capacitor that is the cheapest thing to check, if the fault continues, test the engine outside the washing machine to rule out faults, if the motor is running well check that it reaches current at the time of centrifugation, if it does not check, check the wiring, if it is ok it would be suspicious of the programmer, greetings.

Comentar

Cristian Gonzalez54

hace 5 años

Thank you dear, I will answer you later



Responder

Cristian Gonzalez54

hace 5 años

I did all the steps .. it turns slowly and when it comes to spin it does not advance it stays there only and regulator. It makes a tick tick as a fault the capacitor replaces it but remains the same. Will it be the programmer?



Responder