⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Longvie EL4613

Longvie L 4613 centrifuge washer does not discharge

diegorepara2013

hace 5 años

Hello good night to the full forum ... I want to tell you my name is a client and she tells me that her washing machine longvie L4613 to which the drain pump was changed makes the drain but when centrifuging it does not drain ... the subject is that I have to visit it and I would like to have an idea about this washing machine because I think this problem is strange and I would like to know where I start .. since I look forward to your comments .. greetings and thanks for your contributions

Comentar

wilfredgc3

hace 5 años

Test that you have the hot water and cold water hose connected, both at the same time.

Comentar

diegorepara2013

hace 5 años

Sorry for the delay is that I was busy with other jobs and I could not corrode your comment



Responder

alturasbal

27.174

hace 5 años

Hello, check if at the time of centrifugation the pump arrives, if it does not arrive but it does the intermediate emptying, the problem is of the programmer, greetings.

Comentar

diegorepara2013

hace 5 años

Hi heights there, I noticed and he got a good idea ... what I noticed was that the pump was changed to the washing machine (only the engine) and the bellows-type black hose that comes out from below was as badly located .. my question is, It will be for that issue that I did not achieve a good drain I position it more in decline and I download well?



Responder

alturasbal

27.174

hace 5 años

If that was possibly strangled, check that there is no object inside the pump tube and in the hose too, regards.



Responder

luis38

95.432

hace 5 años

Dear, as the colleague says, check if there is no tension in the pump when it stops draining. If the voltage is cut, you should suspect the programmer. Regards

Comentar

luis38

95.432

hace 5 años

Dear, rate some of the comments as Solution, to conclude the issue. Regards



Responder



diegorepara2013

hace 5 años



hace 5 años

Well I tell you what happened to me, this washing machine was used in a house where the client explained to me that the water they had came with a lot of tartar and I found that in the rubber bellows of the door below it has an additional drain which was totally clogged. . I uncovered and clever problem solved I began to drain the water well .. well it goes without saying that I am super grateful for your unconditional help I hope you serve the solution I found to this problem .. I send greetings to all and it will be until next time ;)

Comentar