⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
WD-14311

When filling it does not retain water and sends it to the drain

Rafael Nieto
hace 5 años
hace 5 años
At the beginning of the cycle of my washing machine the filling begins but at the same time it also starts the drain and never ends, I already tried the other functions such as spinning and drying and you are working perfectly ...
lusangor
lusangor
56.366
hace 5 años
hace 5 años
Hello, check that the drain hose is at a height of about 60 cm. As minimum. If the height is good, everything indicates that the triac that feeds the pump, on the electronic board, is more, letting it activate, just turn on the washing machine. Regards
juan guillermo caceres
hace 5 años
hace 5 años
Hello, check that the end of the corrugated hose is not submerged in sewage in the drain, if this is the case there is a water absorption effect that enters the washing machine called the "siphon" effect reached a certain level of filling. Regards

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.73
(22)

Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos

Maximiliano Resch
$ 40 USD
$ 20 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis