⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

WD-14311

How to adjust water level Washing Machine LG TrommWD14312RD

Danielhardware

hace 6 años

Hello everyone' I bought a washing machine model LG Tromm WD14312RD. It works well, but my friend told me that he sold it to me that he once had problems with the pressure switch that gives the height of the water level in the drum. I want to know if the washer is getting the right amount of water. Could you tell me what water level this washing machine operates with? How to realize if you have to adjust that pressure switch or change it? I would be grateful. Thanks and regards

Comentar



lusangor

56.366

hace 6 años



hace 6 años

Hello That washing machine works with very little water, it does not reach the level of the door bellows, it is usually halfway between the drum and the bellows, they are low consumption and water saving. Regards

Comentar

lusangor

56.366

hace 6 años

Any results to comment?



Responder

Danielhardware

hace 6 años

Thank you very much for your clarification. I explain in more detail:
When I put it on without clothes, to be able to see exactly where the water reaches, I realize that the water reaches the edge of the bellows. That is, load the water to the edge of the drum, to the bottom edge of the door bellows. I would like to know if this is correct or should load less water. If so, according to your explanation I think so, please tell me how to regulate the pressure switch. How to adjust it correctly to load the optimum water level, the factory level



Responder

Danielhardware

hace 6 años

Sorry for not telling you before. Due to work issues, I had not been able to review the forum. A hug



Responder

lusangor

56.366

hace 6 años

That is the optimum level of water, do not touch the pressure switch regulation, it is already factory calibrated, if that calibration loses it, it must be replaced. But as I told you, that level is correct



Responder

Danielhardware

hace 6 años

Okay. Thank you. I leave it that way then. A hug



Responder

lusangor

56.366

hace 6 años

Yes, leave it that way and observe the results of the washes, just do not exceed the kilos of cargo. Luck



Responder

Nico Beverini

hace 6 años

hello daneil good afternoon? the washing machine loads the amount of water according to the user's indication if it is in full load it is more than half a filling drum, if it is in 1/2 load the washing machine loads water to less than half a drum. If the washer never finishes loading water, it may be that the pressure switch or the water valve is damaged. If the washer cuts the filling and washes normally, it means that it is in optimum operation.

Comentar

Danielhardware

hace 6 años

The valves are in good condition, also cuts the level of water filling without problem. The question is if you wash with less water than you should use. It is a front loading washing machine. Greetings and many thanks



Responder