LG fuzzy Logic Turbo drum washing machine
Hello greetings Luis .. thanks x answer. If I thought it could be the triac but xq when I order the machine to wash and spin works well it does not detect any error ... it is only the problem when I start the machine the engine starts running only without any order and the drain engine that is at rest does not pick up the arm .. but when I give the order to wash and spin it there if it picks up the arm normally .. those are the problems that I have .. greetings
Dear, perhaps there is a fault in the plate that is linked to detecting the weight of the clothes. Normally when turning on the washing machine, the detection of the weight takes place with a few turns of the motor. Then the Drain Motor is energized to its first position, subsequently stopping to wash. Regards
then master what would be the fault .. I already tried the triac and they work correctly .. it is a current that is feeding the engine when I start the machine .. tell me what component it could be to see how it is and to be able to replace it .. thanks x help me
Hello ... what I did was to cancel the pink wire that goes to the drain motor ... x that that is sending farza signal and to fail the drain engine did not pick up the arm when I turned on the machine and towards activating the engine..and the clutch and The drain motor regulates you so that it only works in washing and spinning xq in idle mode is that it failed .. already poor and works normally the machine does all the cycles without any fault .. tell me what consequence there if the pink wire is canceled ..... xq the problem is coming from the micro .. Greetings
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
