oswaldo lizarraga

6.567

hace 6 años

Good afternoon, you must be very careful when uncovering the card, some put cuter and scratch and scratch until the plastic is broken and the tracks of the form are thrown, in these cases if no track has been damaged and you located the correct Triac that It was short and you replaced it with an equal one, in some cases you have to check the Driver which is the integrated one that sends direct order to the triacs.

Brayan Jose

4

hace 6 años

Good afternoon. I located the triac to do the test immediately, use one of the motor turns that was the same code and the pump failure was gone but the problem now is that when activating the washing machine (choose cycle and start) Nothing activates. (Filling valves, pump drains motor turns) nothing does not activate anything the time runs on the card but does not activate any component but it is when I connect the common cable.
In other words, the card and the food in connector and I turn it on without the cables (Connectors) and the common current I test it with the outputs of the

oswaldo lizarraga

6.567

hace 6 años

Hello, have you already discarded the integrated driver?

oswaldo lizarraga

6.567

hace 6 años

What happens is that sometimes the integrated driver is damaged by having a triac in short and also check its power of the mentioned element.