⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Indesit

Indesit WI 105 EX Washing Machine, Always washing in program 5

pelicano
hace 6 años
hace 6 años
Good Morning. Greetings to all. My Indesit washing machine starts to wash in program 5 and everything starts well, but it does not advance in the washing cycle, it can be thrown all day, to continue with the washing I have to change the programmer by hand to spin it. I thought the fault resided in the programmer and I have replaced it, but the fault persists. Sometimes the programmer starts spinning and does not stop. Could you tell me what could be due to this breakdown. Thanks for everything and greetings.
lusangor
lusangor
56.366
hace 6 años
hace 6 años
Hello That washer does not have a programmer, what it has is a wash selector and it does not walk like an electromechanical programmer. Once you put it in a number, there it stays doing the washing, taking the time that it has stipulated of factory, the electronic card. Can you clarify what you replaced? In this link, you have the user manual ...... https: //www.manualpdf.es/indesit/wisl-105-ex-v/manual Regards
pelicano
hace 6 años

Thanks for your comment
In the parts store they told me it was the programmer.
but what is replaced is the wash selector. As you have said, it is the big wheel in the front right.
Greetings.
when I looked at the washing machine I didn't see any electronic card, where that card would be.

Responder
lusangor
lusangor
56.366
hace 6 años

Normally, lower left rear

Responder
pelicano
hace 6 años

Thank you
I will look at it.
Someone has the electric scheme of the washing machine

Responder
pelicano
hace 6 años

Good
This is confirmed is the plate. Replacing is expensive and is also deprogrammed.
You have to go through the official service to program it,
Therefore the repair is ruled out.
The cost is close to the value that is not worth repairing.
Thanks for everything

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis