⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
General Electric

Water level tub box covered with tartar

miguel leon g
hace 5 años
hace 5 años
Dear friends, I have a washing machine that has a small square box in the tub where the water level hose arrives and is covered with tartar, as I can clean it without disassembling or taking out the drum as it overflows Thank you
ydd:alualo
ydd:alualo
2.847
hace 5 años
hace 5 años
Hello, I think that the only thing you can do is to introduce a 7-wire power cable, with the filaments open, and try to turn it inside the chamber, ensuring that there is water inside. Obio that the cable is not connected to electricity, and only serve to remove dirt, as much as possible, then let water run, preferably hot, luck, greetings. alualo
miguel leon g
hace 5 años

Thank you, friend, it's like a lid that sticks out of the tub and is square and connects the hose at the top, it has tartar that covers the outlet and the tub overflows, I don't know if the lid comes out sealed ones and neither that it has inside that can damage with a wire

Responder
ydd:alualo
ydd:alualo
2.847
hace 5 años

Hello Miguel, wanting to remove that box or the lid as you say, it will cause you problems later when you want to paste it again, it is better as I tell you to insert the cable with the open ends and give it turns inside the box, without fear, inside there is no nothing, try to pass hot water then and let enough water drain to remove as much of the dirt as possible, it will work noral until you lie again, greetings.

Responder
miguel leon g
hace 5 años

Thanks, it worked well with a little vinegar

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.94
(16)

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación

Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis