⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
General Electric
when connected and when the knob is off, the G / E washer starts
2
hace 6 años
hace 6 años
Good friend, I have a GENERAL ELECTRIC ID SISTEM 4.0 12kg washer model TD1240PBS1 that when connected to the mains and being in the off position turns on directly in centrifugation and none of the controls to turn it off work, neither the pause and start buttons work , nor can I change the cycles of washing, washing, squeezing, etc. .. AND ONLY OFF IF I DISCONNECT IT !! .. I disconnected the plug that goes to the bottom of the washing machine and remove the control box to test it separately , and only then I see the controls work, as the cycle lights come on and I can change them, the ignition knob also works because the filling pump starts , which does not ask if the control box is connected to the branch that goes to the motor ... I hope you can guide me with this problem ... THANK YOU .
57.307
hace 6 años
hace 6 años
Alex any of the 2 triacs is short, check those on the electronic card, greetings
2
hace 6 años
Thanks fermin 007, I followed your advice and that was exactly the fault. One of the triacs (BTB 16 800CW) is short! I am not an electronics technician, I don't know much about washing machines, but apart from that I like to learn new things, it is also true that the situation in Venezuela has pushed us to try to solve by our own means ... THANK YOU!
57.307
hace 6 años
Alex I am glad that you have solved, do not believe here in Mexico we are already similar to the Venezuelan brothers hehe not the same but we are going to fly, cheer up, we are already here and there to move on, luck and be well, greetings.
¡Aprende a reparar con estos cursos YoReparo!
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad