It does not heat the water when washing my washing machine G. E
Thank you very much for answering today. I noticed why I was with other things and always left him for another day,
I was able to solve the issue, the cable of a file was cut, I fixed it and it was perfect, thank you very much. Now another thing happens that this is fixed on Friday and today another issue came up, now the drum does not spin you could help me again by favor. I want to die since I could solve and I was super happy and now this. !!!
Take the water and hear the noise as it sends the signal to turn and nothing, neither centrifugal nor does the kind as it will turn.
I found these severe wires that are of that white shower that is in the bellows but I don't know how they are located and if they are three since only 1 has stripped wires
https://pcdn.piiojs.com/i/jssywl/vw,712,vh,0,r,0,pr,1,wp,1/http%3A%2F%2Fcdn.yoreparo.com%2Fuploads%2Fimagen_post% 2F0001% 2F20% 2F12a44485465b21369610680cb0e4f026e1dac39c.png
They have run away from the sensor connector, unlocks the white connector, has a small slot on the top and takes the connector out, see if it has any remains of the plastic of the cables, so you know how they are connected, if it is difficult, you can remove the bellows sensor and then remove the white connector
Ok, I'm going to try to do it, thank you very much. Could it be that I didn't turn the drum?
¡Aprende a reparar con estos cursos YoReparo!
