⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
7500
Hello how are you ?, the washing machine I have started to throw error
hace 5 años
hace 5 años
Hello, the 6500 glasses washing machine that I have from one day to the next began to not wash after only centrifuging and then I started throwing error 5 I read that it could be the pressure switch change the same and still does not start the wash load water and does not cut and If I blow the thermostat, it only drains a centrifuge. Thank you
23.662
hace 5 años
hace 5 años
Hello, I clean the base where the sleeve that goes up to the pressure switch fits? there may be sediments and therefore does not cut the water inlet, check that point. Regards
hace 5 años
hace 5 años
Hello again after a couple of washes I started marking error 5 will be the plate and if that is how it is removed
. Thank you
23.662
hace 5 años
Hello, I do not think the plate is, in these cases the sleeve can be the problem, punctured or loose in its inserts, that also leads to error, see the pressure switch connectors if they are without sulfation, if you have a better contact cleaner and fly to Check if I do not accumulate sediments again at the base of the drum. Regards
¡Aprende a reparar con estos cursos YoReparo!
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad