⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
7500

Gafa inox 7500 washer is drained in drainage

Igno1991
hace 6 años
hace 6 años
After lava is drained and tilted there, it never reaches the rinse. I tested the pump and it works, the tmb plate is new, has few months of use. I tried another pump to get my doubts out, but the same thing happens to me.
alturasbal
alturasbal
27.174
hace 6 años
hace 6 años
Hello, the error is accusing that there is a delay in draining the water, check if the machine is empty or not, if it does not there may be a plugging in the drainage system (coins, fluffs, etc.), if the machine is empty it can If the pressure switch is failing, false contacts in its connector or that its sleeve is plugged and does not release the air inside it, check this and comment, greetings.
Igno1991
hace 6 años

I could solve it, it was the pressure switch. Thanks for the help

Responder
juan guillermo caceres
hace 6 años
hace 6 años
Hi. Check the electronic board if you see any flashing, sometimes the resin covering it makes it difficult to inspect the eye. It could be that the triac that governs the discharge pump has broken down. Regards
Igno1991
hace 6 años

Hi. The triac sends the action to the pump which starts and discharges and then throws the error "E3". Can it be that the triac is failing?

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.94
(16)

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación

Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis