I have a problem with a Frigidaire Aqua Plus washing machine. When they brought it to me, they told me that it was not spinning and lately I was not taking out the water. Someone had already tried to repair it but did not have much knowledge. He had exchanged the drain pump for a pump that was not for that washer. The first thing I did was put the new original pump. Once the pump was changed correctly, the water began to drain but it lasted too long, draining and after about 5 minutes it stopped and gave an error on the screen. Note that the pressure switch was loose and the adjustment on the bottom, which is like a plastic nut, was loose. Turn the adjustment all the way down and try again, but when you started the wash cycle, the beater began to turn without allowing the water to enter, I loosened the adjustment a bit and tried again and now if it allowed the water to enter and began to wash , I drain the water and start to turn to drain, then the rinse cycle begins and I drain the water, but it lasts a long time draining and stops and gives error. It does not spin. Already check the hoses that are not clogged, take out the tank and check that there was nothing obstructing the drain, the switch on the lid tested it with a multimeter and is still working. Someone could guide me a little. I don't like buying parts if it's not necessary. Could it be the pressure switch? Or could the Capacitor be giving a problem? Will the control panel card be? Thank you and greetings!!

Excellent gonzalo rodrigueztecnico, Thank you, Change the pressure switch and voila, like new.