hace 6 años
Good evening, pupilo2015.
Using a blade screwdriver, you can carefully lift the upper body of the washer to visualize the metal lock that is about 10 cm from each front corner.
By pressing both locks you can release the upper body and then remove the front cover. Do not over check if there are any screws in the fold of your bottom.
Thanks and regards.
¿Realmente quieres cerrar esta reparación?
Sí
No
¿Realmente quieres reabrir esta reparación?
Sí
No
¿Realmente quieres borrar este post?
Sí
No