⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

EslabÃ³n de Lujo

AWH651 washing machine thermostat

logotipo62

hace 5 años

Good night: I have to repair an AWH651 luxury link washing machine and by mistake disassemble the part that contains the 3 thermostats. The problem is that they fell and I don't know where each one goes, I know that each one has a temperature assigned but I don't know the position each one has, it is one of red, another green and another black. I don't know which one goes to the left, right and down. I appreciate if someone can help me. From already thank you very much Cheers Fernando

Comentar



luis38

95.432

hace 5 años



hace 5 años

Dear, physical position is not important. If electrical installation is important. They are thermal of 40, 60 and 90 degrees. Normally in the cables is the identification.

Cheers

Comentar

logotipo62

hace 5 años

Hi Luis38, thank you very much for your help.
The cables say nothing, they are all orange and have no inscriptions, I had signaled them to each one by position but then I sent it and there I am.
I guess the colors of the thermostats should indicate the temperature values, and I will have to continue testing the wires to the knob that selects temperature.
I was looking at a post of yours in which it says that the values and type should appear on the wing.
These say nothing of that. The only thing they say is the same for everyone:
Type: 261P
16 (3) / 250 ~
T 130K
Regards Luis38



Responder

luis38

95.432

hace 5 años

Dear, according to the circuit one of the wires is common to the three thermal. If they have no references, you will have to control the temperature selector. Normally the red is 90 degrees. Cheers



Responder