⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Eslabón de Lujo
Ewt07a Luxury Link automatic washing machine, does not rinse or spin
34
hace 6 años
hace 6 años
Hello friends, this washing machine came with several problems, overflowing and never starting the wash, bypass the low and medium contacts of the pressure switch and adjust the programmer to medium load and full, short and wash; that gave me the idea that it is either the pressure switch or hose, it is solved; but at the end of washing, it drains, but the process never ends, when it is about to finish draining the water and there is very little left, the pump goes for a few seconds and cuts and lets in more water, that is, in seconds it opens the loading selenoid and acts pump continuously, that is to say that it empties on one side and brings water on the other and I have to cut it. Of course it never reaches the spin, but if this happens after washing. I lean towards the plate, but I want to be sure before I disburse that money, because when I program it by cutting the process and switching to the functions manually everything works perfectly. I also doubt the actuator since I hear the "clack" of his selenoid; but I don't know how and when this device should work. I took it out of the machine, tested it directly and when extending the arm inside the device manually with a screwdriver, it re-enters very slowly when I give it energy. Does that mean it works well and I discard it? Can you be responsible for the problem I described or sure is the control board. Thank you very much for the help you can receive.
27.174
hace 6 años
hace 6 años
Hello, if the plaque is an alternative could this be the cause of the problems, if it is the original it is because it has reached the end of its life, greetings.
34
hace 6 años
If it is the original with that plastic that covers it, it does not even let you check the triacs, which are very easy to break. It shows in many areas of that plastic that covers it, areas of overheating in the form of burns of this material, well I thank you very much, the last nuisance is to ask you how I can not buy the original, which also comes with that coating that does not It gives you chances of not even changing a capacitor, if you can advise me which copy is the best, or if they are really all the same, thank you friend, I await your response.
27.174
hace 6 años
Alternative plates I do not know, I only have references of the RP brand but these references are not good, ask in some trade of the item to advise you, greetings.
27.174
hace 6 años
Another option is to do the processes manually, it is annoying but you can do it until you solve the issue of plate replacement, greetings.
504
hace 6 años
hace 6 años
Hi. Greetings to the forum. You said you jumped the pressure switch, when it starts with the drain, do you take out the bridges or leave it always bridged? If you do not remove the bridges when you have finished draining, the processes do not advance and will never spin. Start by changing the pressure switch. Comment on this point. Regards
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos
Maximiliano Resch
$ 40 USD
$ 20 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad