1530737187533101379241.jpg [3.57Mb]
This washing machine when the pump operates, the circuit breaker jumps,
Take out the bomb and you don't see anything weird, it's more I did a wash without problems
the cables don't look bad
I don't think it's another component
Any subjection?
⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Eslabón de Lujo
1530737187533101379241.jpg [3.57Mb]
This washing machine when the pump operates, the circuit breaker jumps,
Take out the bomb and you don't see anything weird, it's more I did a wash without problems
the cables don't look bad
I don't think it's another component
Any subjection?
AWH 664 Luxury link washing machine skips the circuit breaker
401
hace 6 años
hace 6 años
1530737187533101379241.jpg [3.57Mb]
This washing machine when the pump operates, the circuit breaker jumps,
Take out the bomb and you don't see anything weird, it's more I did a wash without problems
the cables don't look bad
I don't think it's another component
Any subjection?
23.662
hace 6 años
hace 6 años
Friend, check the wiring status? I tried another discharge pump? Otherwise, comment on the results. Regards
401
hace 6 años
I checked the 2 wires the brown and the light blue double, I didn't find anything weird
The bomb changed tomorrow so I put a new
401
hace 6 años
Good afternoon, Juan I changed the pump and tried a wash and walked, my doubt is that if the washing machine is walking and I want to put the tester between the housing of the washing machine and a mass skips the circuit breaker as something has
23.662
hace 6 años
Friend, in the tester; in volt scale; Touch the washing machine cabinet with one tip when it is working and have the other tip touch your fingers, check the tester for a high leak. Comment, I think the circuit breaker is very sensitive. Regards
401
hace 6 años
Good afternoon Juan I told you that I did the test you told me
I put the tester in volt on the 2 volt scale and the measurement fluctuates, take 0.05 to 0.40 volt, I don't know if it is normal or what measure I should give
401
hace 6 años
I changed the pump and I washed it, I did not jump the circuit breaker but the power light once I finished washing turned off, in this case when I open the door to take out the washed clothes it is like I try to turn on, and sometimes it stays on again close and open and goes out, but a false contact there
401
hace 6 años
The washing machine I have connected to a shoe which has a key to turn off, even turn off this shoe the light that tells you is still flashing, any idea why he does this?
23.662
hace 6 años
Partner. Remove the shoe and plug into a wall outlet. Check its operation. The value of volt is within normal values. Regards
401
hace 6 años
Good afternoon Juan told you that I wash 3 times well and in the fourth wash, when I was draining and the circuit breaker jumped again
So go back to the beginning and the pump is new, it is connected to the wall and jump
23.662
hace 6 años
Companion, the alternatives are running out and the programmer remains as the main suspect, if you have a contact cleaner, spray the contacts of the programmer and at the same time turn the knob, it would be to eliminate some spark that may be between contacts and is causing a random failure , especially where the drain pump connector goes. Regards
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos
Maximiliano Resch
$ 40 USD
$ 20 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad